Нашата компания не е производител, оторизиран дистрибутор или оторизиран представител на марката JUNG PUMPEN (brand of Pentair) България. Частните търговски марки и артикулните номера, показани на този уебсайт, са собственост на съответните им собственици.
Производител
JUNG PUMPEN (brand of Pentair)
Страна
Germany
Номер на артикула
JP42765
Описание
Pumpe MULTICUT 20/2 M PLUS nicht für den Einsatz in fäkalienhaltige Abwässer einsetzbar! Vertical, single-stage, submersible, aggregate with horizontal discharge and high operational reliability. LGA homologation DIN EN 12050. - outlying adjustable hardened stainless steel cutting system, cutting plate with helical groove, - silicon carbide mechanical seal independent of sense of rotation, - controllable oil chamber, duplex rotary shaft seal as secondary seal, safe to run dry, motor tested by PTB (German technical inspection authority) - Impeller and replaceable wear plate made from Grivory (fibreglass reinforced plastic) - moisture sealed cable inlet with plug-in connection impeller type: five blade, open vortex impeller max. size solids: 7 mm discharge: DN 32, PN 6 medium temp.: 40 degr. C flow rate Q: max 18 m³/h delivery head H: max 24 m weight: 29 kg voltage: 3/PE~230/400 V, 50 Hz f.l.c. I: 7,0 / 4,0 A output P2: 1,9 kW r.p.m. n: 2900 1/min starting: d.o.l. enclosure: IP 68 motor protection: winding thermostats cable: 10m H07 RN-F 6G 1,5 The function of the winding thermostats must be ensured by a suitable control unit. Additionally an excess-current release or a protective motor switch is necessary.
Наличност на склад:
По заявка